CONTACT
Address: 426 Haichangnan
Road,Haining, Zhejiang,China.  
Tel:0086-573-87385082

Fax:0086-573-87290628

Email:info@lipigment..com

RECOMMENDED

Transparent Yellow G

Description

Chemical Name:  Diarylide Yellow AAA 
CAS No.: 6358-85-6
EU No.:  228-787-8 
C.I. NO.:  21090 
Chemical Formula:  C32H26Cl2N6O4

Molecular Weight:  629.49

Yellow

 Transparent Yellow G

C. I. Pigment:    Yellow 12 C. I. NO.:    21090


Description

Transparent Yellow G is a medium shade diarylide yellow offering excellent tinting strength and value.  Slightly more opaque than our 1212.

Applications

Transparent Yellow G  is primarily recommended for various types of printing inks, especially offset inks in addition to packaging gravure, flexographic inks and in some aqueous systems.   Other uses can also be found in the coloration of rubber, for use in artist colors and crayons. 

Typical Physical Properties
Bleed Characteristics
pH (10% Aqueous Slurry) 5.5 - 7.0
Moisture Content % < 2.0%
Oil Absorption (g oil/100g) ~ 53
Specific Gravity (g/cm3) ~ 1.4
   
Xylene 3 - 4
Ethanol 4 - 5
Lacquer Solvent 
Mineral Spirits 5
Water 5
   
Lightfastness (1 - 8)
Chemical Resistance (1 - 5)
Full Shade 4
Tint 2
Acid 5
Alkali 5
Heat Stability - Inks
Heat Stability - Plastics
Heat Stability - Coatings

(Metal Deco - 10 min)

~ 390°F

--

(Baking Alkyd - 30 min)

~ 375°F


Request Sample

LIMITED WARRANTY: Seller warrants that its products are free from manufacturing defects. The Seller makes no other warranty beyond that contained in this writing. DISCLAIMER OF OTHER WARRANTIES: NO OTHER WARRANTY, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY. DISCLAIMER OF LIABILITY FOR RELIANCE ON INFORMATION PROVIDED BY THE SELLER: The information contained herein is true and accurate to the best of our knowledge, but is provided without warranty or guarantee. Since the conditions of use are beyond our control, Seller disclaims all liability and assumes no legal responsibility for damages resulting from use of or reliance upon the information contained herein. Seller strongly recommends careful screening/testing before using its products in production. TIME LIMIT FOR BRINGING SUIT: All suits must be commenced within one-year from the date on which the product at issue is delivered to Buyer.



Home > NEXT

Inquiry

means required information.
Subject:
Content:
Your
Company:
Your
Name:
Your E-
mail:

(Please make sure your E-mail address is correct.Else,the receiver cannot
reply you afterwards
)

Your Tel:
Your Fax:
Your
Country: